-
SMT power inductor
This type SMT power inductor is widely used for LED, Digital products, LED drive.
With open unshielded design, it has Low tolerances at high inductance values, The size is small.
-
SMD power inductor
Surface mount power inductors for applications ranging from power supply to power converters. Core types include ferrite and pressed iron powder with topologies including: non-shielded, shielded, pressed iron powder, ferrite coated, and wirewound chip inductors.
With low loss core and compact size, it is ideal for noise suppression, EMI filter, Perfectly suitable for switching regulators. -
SMD integrated power inductor
Ming Da is professional manufacturer for SMD power inductor (Shielded/Unshielded). Power inductors are very important in applications where voltage conversion is necessary because they yield lower core losses. Sometimes Power inductors also will used in store energy. Power Inductor maintains a steady current in an electrical circuit with a different current.
-
Radial Shielded power inductor
For shielded power radial inductor, it is ideal as a choke coil for noise filtering, With low Rdc, large current type, it is best for the power supply line.
Unique mold could be opened for you with your size request.
-
Power inductor
Toroidal inductors are passive components that feature a coil of insulated or enameled wire wound on a donut-shaped form made of ferrite or powdered iron. Practical and reliable, toroids are used in low-frequency circuit designs that requires large inductances. They are widely used in medical, industrial, nuclear, aerospace audio products, LED driver and vehicle wireless charging,and other electronic applications. If your circuit design requires a quality toroidal inductor, find them from leading manufacturers, at Future Electronics.
-
PFC inductor
PFC inductor, also called toroidal inductor, Capable of handling very high DC bias current with minimal inductance roll off.
“Power Factor Correction” The power factor is the ratio of the effective power divided by the total power consumption (apparent power).
-
High flux custom toroidal power inductor
The toroidal coil inductance is a very ideal shape in inductance theory. It has a closed magnetic circuit and few EMI problems. It makes full use of the magnetic circuit and is easy to calculate. It has almost theoretical advantages. It is all-inclusive toroidal coil inductance. However, there is one biggest disadvantage. , It’s not easy to scratch the thread, and the process is mostly handled manually.
-
High Current Wirewound Customize Good Quality Factory Product
Core Material: Iron Power Core
With Helical Wound Surface Mount inductor, It is Capable of handling very high DC bias current with low inductance roll off.
Induction/Size/Wire diameter/Electric Current :Normally our customer specify the specs (size, inductance, current) and we built to meet the specs.
-
Color code inductor
The color ring inductor is a reactive device. Inductors are often used in electronic circuits. A wire is placed on an iron core or an air-core coil is an inductor. When the current passes through a section of wire, a certain electromagnetic field will be generated around the wire, and this electromagnetic field will have an effect on the wire in this electromagnetic field. We call this effect electromagnetic induction. In order to strengthen electromagnetic induction, people often wind an insulated wire into a coil with a certain number of turns, and we call this coil an inductance coil. For simple identification, the inductance coil is usually called an inductor or an inductor.
-
200uH Sendust Core Inductor
200uH Sendust Core Inductor
High current power inductor is mainly made of high quality PEW or EIW copper wire
Advantage of this high quality coil with litz wire and ferrite fortification in the center is that devices using this solution can be charged on charging stations of both standards.
Advantages:
1.Customized according to your unique request
2. Using Elektrisola wire, high stability.
3. Precision wound coil and 100% all tested to ensure the quality.
4. Build to confirm ROHS compliant
5.Short lead time and quick sample
6.Samples could be provided for your testing
Features:
1. Wire diameter: Customized
2. High current, up to 65A TYP
3. Current: 200uH
4. Made according to customer’s request
Size and dimensions:
1. Inductance: 200uH for 32A.
2. Actual RMS current 32.2A rms 50Hz sine, but we want higher current capability of 50A, because efficiency is very important in the project.
3. Saturation current > 62A (50% of nominal inductance)
4. Current Ripple: 16A
5. Actual voltage 400V peak-to-peak 50kHz.
6. No housing, standalone inductors only, we will pour inductors in resin.
7. Resonant frequency Fr > 2.5MHz.
Taking into account the need for high-requirement SRF value, we chose this large black magnetic ring for winding.
In the field of magnetic toroidal inductors, small magnetic toroidal inductors have great demand in the market. On the contrary, there are few large magnetic loop inductors, which is based on technical difficulty and cost issues.
Mature technology is the self-confidence of the factory.
In our factory, the skilled workers have more than ten years of technical experience. In the production of these different types of magnetic loop inductors, the workers’ time and technology are in place in one step, which largely solves the problem of production efficiency.
To design this three “high” product, we have passed many tests and determined the final competent solution through material selection and production methods.
The strict requirements of customers are also our driving force.
Our magnetic core materials and copper wire materials are purchased from famous domestic raw material manufacturers KDM and Pacific Copper Wire. The skilled craftsmanship and superior materials make Mingda’s products more quality assurance.
At the same time, our quality supervision is like the finishing touch, with careful inspection and testing before shipment, and safe and reliable packaging methods. The products we sell have won unanimous praise from customers in Korea and Japan!
-
Choke inductor
Ferrite rod choke inductor is widely and popular in automotive electronics, with small size, the main advantage is cost effective, high inductance and low loss.
-
Radial Leaded Wire Wound Inductor
The I-shaped inductor is an electromagnetic induction element composed of an I-shaped magnetic core frame and enameled copper wire. It is a component that can convert electrical signals into magnetic signals. The I-shaped inductor itself is an inductor. The skeleton of the I-shaped inductor is supported by the winding of the copper core coil. I-shaped inductance is one of the attributes of electronic circuits or devices.
