High Current SQ1918 Vertical Flat Wire Common Inductor
Common mode inductor can also be called common mode filter or power filter. The common mode inductor is a common mode interference suppression device with ferrite as the core. The SQ series common mode inductors produced by Mingda Hi-Tech adopt high quality ferrite cores and flat copper wire. The low differential mode noise signal suppresses the interference source, and the coupling coefficient is large. It has little effect on high-speed differential signals, and it is difficult to deform in high-connected signals. It has a good suppression effect on high frequency common mode noise. At the same time, it has a smaller size. Common mode inductor is two sets of coils with the same number of turns, the same wire diameter, and the opposite winding directions on the same iron core.
Just provide basic information from your engineer, we could help to customize ideal product for you.
Advantages:
1. Small size, high current, unit current density is more than 1.3 times of round copper wire
2. Through Hole Mounting Construction
3. Low DC resistance, small distributed capacitance, good heat dissipation
4.Closed magnetic circuit, low magnetic leakage, Ideal EMI effect
5.Use fully-automatic machine to wind the wires, the wires are neatly arranged without crossing, and the production efficiency is high
6.High insulation strength, it can extend the life of power supply.
Size and dimensions:
Electrical properties:
ITEM |
SPECIFICATION |
TEST CONDITION |
TEST INSTRUMENT |
Inductance(uH) |
20mH Min |
1KHZ/0.25V |
TH2816B |
Resistance |
260mΩ (MAX) |
25 °C |
GKT-502BC |
Hip-pot Test |
coil1-coil2 |
1.5KAVc 5mA 3Sec |
|
Applications:
1.Telecommunications Device
2.LED Light
3. Audio & Visual Equipment
4.Solar Energy Converter