Factory Supply Center Tapped Transformer - High frequency transformer – Mingda
Factory Supply Center Tapped Transformer - High frequency transformer – Mingda Detail:
Overview:
Transformers are coupled by magnetic flux linkage, or mutual inductance.
(1) In order to reduce loss, high-frequency transformers often use soft magnetic materials with high permeability and low high-frequency loss as cores.
(2) High-frequency transformers are generally used in small-signal applications, with relatively small size and fewer coil turns.
Mainly used in high frequency switching power supply as high frequency switching power transformer, also used in high frequency inverter power supply and high frequency welding machine as high frequency inverter transformer.
Vertical type and horizontal type is both available for your choice.
1. Could customize product according to your engineer’s basic information.
2. Designed using ferrite core.
3. varnished and 100% full test.
4. Custom inputs and outputs specifications to meet your specific requirements.
5.UL Certificated.
6.Could customize the transformer according to your request.
Size and dimensions:
Magnetic core joints point black ring epoxy adhesive.
Electrical properties:
Item |
Test conditions |
Pin |
Standard (25 DEG C) |
Inductance |
1KHz/1V |
3.4.5—1.2 |
67uH±10% |
Leakage inductance |
1KHz/1V |
3.4.5—1.2 |
0.3uH MAX (8.9-13.14 Short) |
DC resistance |
3.4.5—1.2 |
8mΩ(MAX) |
|
6.7—3.4.5 |
8mΩ(MAX) |
||
8.9—13.14 |
15mΩ(MAX) |
||
DC resistance |
PRI—-SEC |
AC3.0KV/5MA/10S |
|
PRI—-CORE |
AC2.0KV/5MA/10S |
||
SEC—-CORE |
AC2.0KV/5MA/10S |
||
Insulation resistance |
PRI—-SEC |
DC500V/100MΩ MIN/60S |
Applications:
1. Auxiliary power supplies;
2. High frequency Switching power supply and other electronic equipment;
Product detail pictures:
Related Product Guide:
What’s the role common mode choke play in daily?
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of Factory Supply Center Tapped Transformer - High frequency transformer – Mingda , The product will supply to all over the world, such as: Sweden, Seattle, Eindhoven, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Hellyngton Sato from UK - 2017.09.16 13:44
Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
By Belinda from Bangkok - 2017.06.19 13:51